Skip to content
XSP · WSSL North East, Singapore Live · — aircraft now within 80 km

Live flights over Seletar Airport (XSP)

From 23 to 24 October 2026 the FlyItalyADSB network saw 47 departures and 49 arrivals at Seletar Airport, 48 movements a day on average. The most frequent connections are Subang (SZB), Hong Kong (HKG) and Tokyo (HND). The airline seen most often is Firefly.

Airport data

IATA code
XSP
ICAO code
WSSL
City
Seletar
Region
North East
Country
Singapore
Elevation
11 m (36 ft)
Coordinates
1.41555, 103.86673

What you can track here

Every aircraft passing within roughly 80 km of Seletar Airport that the network receives appears on the FlyItalyADSB live map: airliners on approach and departure, business and general aviation, and — where MLAT reaches — aircraft without full ADS-B. Nothing is filtered out; how much of the area is covered depends on the community's receivers near Seletar.

Seen by the network

23–24 October 2026

Movements a day
48
departures + arrivals
Departures
47
total, 2 days
Arrivals
49
total, 2 days
Connections
8
airports, airline flights

Movements per day

0
20
40
60
Fri 23
Sat 24
Show as a table
Day Departures Arrivals Total
Fri 23 25 22 47
Sat 24 22 27 49

Connections

airline flights both ways, with departure and arrival both seen

  1. Subang SZB Malaysia 21 flights
  2. Hong Kong HKG Hong Kong SAR China 2 flights
  3. Tokyo HND Japan 1 flights
  4. Seoul GMP South Korea 1 flights
  5. Manila MNL Philippines 1 flights
  6. Hanoi HAN Vietnam 1 flights
  7. Jakarta HLP Indonesia 1 flights
  8. Johor Bahru JHB Malaysia 1 flights

Airlines

  1. FireflyFFM 19
  2. VistajetVJT 7
  3. Berjaya AirBVT 3
  4. British AirwaysBAW 1
  5. Cathay PacificCPA 1
  6. Batik Air MalaysiaMXD 1
  7. Qatar ExecutiveQQE 1
  8. Sun AirSAV 1
  9. TAG Aviation USATAG 1
  10. TAG Aviation AsiaTBJ 1

Aircraft

  1. AT75 19
  2. Gulfstream G650 GLF6 10
  3. LJ60 7
  4. GLEX 6
  5. H25B 5
  6. CL60 4
  7. GL7T 4
  8. GLF4 4
  9. GLF5 4
  10. Airbus A319 A319 3

How we count: a flight is a departure here when the network first sees it low near the airport (on the ground, or climbing away from it), an arrival when it last sees it low on approach. Where receivers don't reach low altitude the numbers stay below the real traffic. Connections and airlines come only from airline flights.

Updated every night · the data as JSON (CC BY-SA 4.0)

This data in your app

Every aircraft within 80 km of Seletar Airport, as JSON, with a free key that also allows commercial use:

curl -H "X-Api-Key: YOUR_KEY" \
  https://api.flyitalyadsb.com/v2/lat/1.41555/lon/103.86673/dist/80

Or ask Claude, with the FlyItalyADSB connector: “which aircraft are near Seletar right now?”

Frequently asked questions

How can I see live flights over Seletar Airport? +

Open the FlyItalyADSB live map centred on Seletar: it shows every aircraft picked up via ADS-B and MLAT within about 80 km of XSP, refreshed every few seconds.

Which airlines fly from Seletar Airport? +

Among the flights our network saw (23–24 October 2026), the most frequent airlines were Firefly, Vistajet, Berjaya Air, British Airways and Cathay Pacific.

What are the main connections from Seletar Airport? +

The connections with the most flights seen (23–24 October 2026), both ways: Subang (SZB, 21), Hong Kong (HKG, 2), Tokyo (HND, 1), Seoul (GMP, 1) and Manila (MNL, 1). Only flights whose departure and arrival the network both saw are counted.

Does FlyItalyADSB also track military aircraft around Seletar? +

Yes. Thanks to multilateration (MLAT) the network reconstructs the position of aircraft without full ADS-B too, including military and state flights, whenever they are received by feeders in the area. Nothing is filtered out.

What are the codes for Seletar Airport? +

Seletar Airport has IATA code XSP and ICAO code WSSL. It lies in North East, Singapore, at coordinates 1.41555, 103.86673.

Is the flight data free and open? +

Yes. The live map and the Free API plan cost nothing, and the data is published under the open CC BY-SA 4.0 licence; paid API plans for higher volumes help cover the infrastructure costs.

Improve coverage over Seletar

Coverage quality depends on the density of receivers. With a Raspberry Pi and an RTL-SDR antenna you can help track flights over North East, Singapore.

Become a feeder →